Skip to Content
10PCS IR Infrared Sensor Module Slotted Optical Optocoupler Speed Measuring Sensor Module Photo Interrupter Sensor Motor Speed Detection Robot for Arduino

Price:

$ 17.04


10PCS IR Infrared Sensor Module Slotted Optical Optocoupler Speed Measuring Sensor Module Photo Interrupter Sensor Motor Speed Detection Robot for Arduino

https://m.media-amazon.com/images/I/61idQiaR11L.jpg
15 sold in last 24 hours
  • Adopting a slot type photoelectric sensor, it consists of an infrared light-emitting diode and an NPN photoelectric transistor, with a slot width of 5.9mm.
  • As long as a non-transparent object passes through the slot, it can trigger to output a low TTL level.
  • Using Schmidt trigger to jitter pulses is very stable and can be used for small car speed measurement, distance measurement, and other applications!
  • Install holes with M3 screws at both ends.
  • Working voltage: 3.3V-5V, output form: digital switch output (0 and 1)

$ 17.04 17.04 USD $ 17.04

Not Available For Sale

($ 1.70 / Units)
7 people are viewing this right now

  • Manufacturer
  • Unit Count
  • Brand
  • Number of Items
  • Item Pitch
  • Voltage
  • Material
  • Colour
  • Connector Type
  • Mounting Type
  • Number Of Contacts
  • Material Type
  • Number of Positions
  • Number Of Poles
  • Product Type
  • Pitch

This combination does not exist.

Photoelectric Sensors

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Estimated shipping
Select a product to estimate shipping.

Instructions for use:
After connecting VCC and GND, the module signal indicator light will light up. When there is no obstruction in the module slot, the receiver tube will conduct and the module OUT will output a high level; When obstructed, OUT outputs a low level and the signal indicator light goes out. The module OUT can be connected to a relay to form a limit switch and other functions, and can also be connected to an active buzzer module to form an alarm. The OUT output interface can be directly connected to the IO port of the microcontroller, usually connected to an external interrupt to detect whether the sensor is blocked. If a motor encoder is used, the speed of the motor can be detected.
Precautions:
Correct wiring! Do not reverse the positive and negative connections to burn out the electronic components of the board. Players should set the I/O port of the MCU to input mode/receive mode, otherwise it cannot be used. Other MCUs, or more advanced control boards such as ARM, must be set to input/output mode if the I/O port needs to be set to input/receive mode, otherwise it cannot be used. The 51 series microcontroller can be used directly without the need to set input and output modes.

Main Specification
Manufacturer EC Buying
Unit Count 10 Count
Brand EC Buying
Number of Items 10
Item Pitch 5.9 millimeters
Voltage 5 Volts
Material Copper
Colour Black
Connector Type Screw
Mounting Type Screw Mount
Number Of Contacts 2
Technical Details
Material Type Copper
Number of Positions 1
Number Of Poles 1
Others
Product Type Photoelectric Sensors
Pitch 5.9 millimeters