110V Single Phase On/Off Switch, Ortis Router Table Switch with Large Stop Sign Paddle Easy Contact for Quick Power Off for Table Saws and Other Electrical Equipment
3 sold in last 24 hours
- HANDS-FREE: Never need to take your hands off the work-piece. When we need to shut the power off right away, it can be very dangerous and troublesome to hunting around for a switch under your router table or table saw. With this safety power switch, you can simply turn off the tools by a knee, a thigh or even a hip without much effort. A lot safer and easier than usual.
- EASY TO LOCATE: Large paddle for emergency stop. Engaged with a large green recessed ON button safeguarding against accidental starts, and a large red, easy to see OFF paddle. No more feeling around underneath your table to find your switch. The large sign paddle uses high-hardness materials and is more durable.
- SIMPLE WIRING: No need complicated wiring. The switch has two cords. The 1.5 feet long female cord is to accept the power source plug from your router or other power tool, and the 5.5 feet long male cord is to plug into your standard wall outlet. Just plug it in and you are ready to go. Both cords are heavy duty to stand up to everyday exposure in workshops.
- SUPER EASY INSTALL: Several minutes tops that's all it takes. The on/off power switch is installed just two screws and can be mounted to most type of material.
- COMPATIBILITY: Compatible with basic electrical boxes and table saws, router tables, drill presses and other electrical workshop equipment. The paddle switch allows a maximum current of 16 amperes and 1800 watt power. Please keep this in mind when connecting to the machine.
Estimated shipping
Select a product to estimate shipping.Quick searching for your safety power tool switch
The switch is to make the power down process very quick. You don’t want to hunt around for a switch if you need to turn the power off on your router table or small machine right away especially while your hands are a little bit busy. It would be dangerous to reach down and underneath your router table while the machine is still working. And that’s why the switch is so valuable that they are hands-free.
Why the ORTIS Magnetic Paddle Switch is Perfect for You
Quick Turns On/Off
Engaged with a large red, easy to see OFF paddle, simply bump the paddle with your knee, thigh or hip to shut the power off. A slight bump will do without much effort. And a large green recessed ON button is always visible on the top side of the paddle.
Super Easy Install Process
Only two screws needs to complete all of the steps required for the installation. Several minutes tops that’s all it took. The switch can be installed on most type of materials such as walls, machines and iron frames. Once installed and properly connected, make sure that the switch is in a safe position. If it is loose, be sure to fix the problem before using the switch.
Heavy Duty Cords
Using 1.5 feet female wire and 5.5 feet long male wire. The female wire is used to connect the power tool plug, and the male wire is used to plug into the power source. Both cords are heavy duty cords to stand up to everyday exposure in workshops. No need to strip and twist the wires etc to get it worked. Simple wiring!
Product details
| Main Specification | |
|---|---|
| Spécifications satisfaites | RoHS or UL or CE |
| Appareils compatibles | Presse de forage or Table Saw or router table |
| Fabricant | ortis |
| Numéro d'unité | 1 Compte |
| Dimensions de l'article L x L x H | 2 X 1 X 1 Inches |
| Méthode de contrôle | Toucher |
| Matériel de contact | Cuivre |
| Type de contact | Ouvrir normalement |
| Note actuelle | 16 A |
| Tension de fonctionnement | 110 Volts |
| Terminal | Vis |
| Type de circuit | 1 voie |
| Type d'actionneur | Hinge Lever |
| Marque | Ortis |
| UPC | 779288404458 |
| Nombre d'articles | 1 |
| Mode de fonctionnement | Arrêt |
| Puissance | 1760 Watts |
| Matériau | Plastique |
| Couleur | ROUGE |
| Type de connecteur | Branche-toi |
| Type de montage | Mont mural |
| Product information | |
| Type de commutateur | Kill Switch |
| Technical Details | |
| Numéro de pièce | IIIFS-VXS2121 |
| Modèle | IIIFS-VXS2121 |
| Type de matériau | Plastique |
| Cote de protection internationale | 16 amp |
| Nombre de positions | 2 |
| Protocole de connectivité | X-10 |
| Pays d'origine | Chine |
| Measurements | |
| Dimensions de l'article | 2 x 1 x 1 inches |
| Others | |
| Type de produit | Table Saw Accessories |