3M Disc Pad Face Plate Ribbed, 28443, 4-1/2 in Extra Hard Red
6 sold in last 24 hours
- Designed for use with a 3M Disc Pad Hub
- Various flexibilities support grinding applications ranging from lightweight to heavy-duty
- Plate accommodates a fiber disc of equal diameter
- Plate color indicates disc density for easy identification in the workroom
Estimated shipping
Select a product to estimate shipping.3M Disc Pad Face Plate backs a same size fiber disc (sold separately) to provide firm support and the force required for grinding applications. It is used in conjunction with a disc pad hub (sold separately), which attaches to the power tool, and held into place along with the appropriate disc using a retainer nut (sold separately).
This assembly allows the 3M Disc Pad Face Plate to be easily changed without removing the disc pad hub, allowing the operator to use a single tool for multiple applications from heavy grinding to finishing a workpiece.
Some face plates have ribbing on the bottom face. Ribbed face plates provide additional force when needed for optimal fracturing of the abrasive mineral. By reducing the area of contact, or pressure per square foot (PSI), ribbed face plates increase the grinding pressure of the abrasive with the same amount of operator effort, and extend disc life when dulling is a problem.
Choose a plate with the level of firmness needed for the application—a lighter density face plate for lighter weight grinding applications, and a harder density face plate for more heavyweight grinding applications. Using the correct face plate for the application ensures that the abrasive mineral will fracture as it should, maximizing the life of the abrasive. The plate comes in one of four different colors that indicate the density so the correct plate can be easily identified in the workroom: red = extra hard (for heavy grinding with the coarsest grades), black = hard (for heavy metal removal, large welds, etc.), gray = medium (for general purpose grinding and finishing), and white = soft (for finishing operations on flat or contoured surfaces).
Important information
Legal Disclaimer
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.
3M Disc Pad Face Plate Ribbed
Designed for use with a 3M Disc Pad Hub
Various flexibilities support grinding applications ranging from lightweight to heavy-duty
Plate accommodates a fiber disc of equal diameter
Plate color indicates disc density for easy identification in the workroom
This assembly allows 3M Disc Pad Face Plate to be easily changed without removing the disc pad hub, allowing the operator to use a single tool for multiple applications from heavy grinding to finishing a workpiece.
Product details
| Main Specification | |
|---|---|
| Matériel de traitement | Aluminum Oxide or Zirconia Alumina |
| Composantes incluses | 3M Disc Pad Face Plate Ribbed 28443 or 4-1/2 in Extra Hard Red |
| Fabricant | 3M |
| Numéro d'unité | 1 Compte |
| Dimensions de l'article L x W x H | 6.1 x 5.95 x 1 inches |
| Matériel compatible | Métal |
| Type de grit | Moyenne |
| Marque | 3M |
| UPC | 051141284439 |
| Nombre d'articles | 1 |
| Diamètre de l'article | 4-1/2 inches |
| Matériau | Aluminum Oxide |
| Numéro d'identification du commerce mondial | 00051141284439 |
| Poids de l'article | 5.94 g |
| Product information | |
| Nombre d ' emballages | 1 |
| Technical Details | |
| Numéro de pièce | 051141284439 |
| Modèle | 28443 |
| Type de matériau | Aluminum Oxide |
| Measurements | |
| Dimensions de l'article | 6.1 x 5.95 x 1 inches |
| Others | |
| Point en évidence | For High Pressure Grinding or Attaches to Disc Pad Hub |
| Type de matériau de traitement | Oxyde d'aluminium or Zirconia Alumina |
| Type de produit | Sanding Disc Backing Pads |