MICROJIG GRR-RIPPER Air Ultra ’25 Limited Systainer³ Edition, 3D Pushblock for Safety, Precision and Control, 3-Dimensional Force System, Ideal for Router Table Saw and More
6 sold in last 24 hours
- ULTIMATE 3-DIRECTIONAL WORKPIECE CONTROL: The MICROJIG GRR-RIPPER Air Ultra ’25 applies downward, inward, and forward pressure simultaneously; Keeps material flat on the table and tight against the fence for enhanced cutting precision and operational safety
- AUTOMATIC KICKBACK PREVENTION WITH X-AIR HEELS: Innovative heels flex during the cut then automatically engage at the end; Catches the workpiece tail to virtually eliminate kickback without any user adjustment
- MASTER EVERY MACHINE IN YOUR SHOP: The GRR-RIPPER push block is designed for use on table saws, router tables, jointers, and bandsaws; Delivers consistent, safe material handling across all your stationary woodworking equipment
- PRECISE CUTS DOWN TO 1/8 INCH: Includes micro-thin legs and stabilizers for handling extremely narrow stock; Achieve clean, controlled rips on strips as small as 1/8" x 1/8" with complete confidence
- LIMITED-EDITION COMPLETE SYSTEM: Only 1,500 sets produced worldwide in exclusive anniversary green; Includes two pushblocks, all GRR-RIPPER accessories, the exclusive new GRR-RIP ReNew cleaning station, and two of the new ReSaw Riser blocks, all organized in a custom MicroJig branded Systainer Combi case
Estimated shipping
Select a product to estimate shipping.The GRR-RIPPER AIR ULTRA ’25 – Limited Systainer3 Edition
The most advanced pushblock system ever built, celebrating 25 years of innovation in woodworking safety. With all-new X-AIR Heels, a SafeRip Center Tunnel, and a complete arsenal of precision accessories, it delivers unmatched control on your table saw, router table, jointer, and bandsaw.
Packaged in a custom decorated Systainer3 Combi, finished in an exclusive anniversary green, and limited to just 1,500 sets worldwide—this is more than a tool. It’s a once-in-a-generation milestone in precision, safety, and control.
New GRR-RIPPER AIR SafeRip Cursor and Tunnel + New X-AIR Heels
The SafeRip Kit enhances your GRR-RIPPER's safety features by preventing accidental blade contact with the Center Leg. The AIR SafeRip Cursor guides your setup, and features a cutout aligned with the SafeRip Center Tunnel.
The SafeRip Center Tunnel is a new passage through the Center Leg allows the blade to pass safely while keeping pressure on both sides of the cut.
The X-AIR Heels on every leg are built-in, auto-deploying heels that flex out of the way mid-cut and snap into place at the tail end for total control. Nothing to attach, nothing to lose—just safer, smarter cuts every time.
Don't use a table saw without it.
Virtually eliminate kickback.
Three directions of force gives you superior precision, control, and safety.
Downward - Keeps stock flat on the surface.
Inward - Keeps stock firmly against the fence and virtually eliminates kickback.
Forward - Controls and feeds both sides of the stock for cleaner cuts.
Superior grip and traction
Green Grr-rip is the proprietary non-slip material that gives you superior gripping power over workpieces and materials such as oak, cherry, walnut, ebony, pine, poplar, maple, plastics and aluminum. Treaded grooves provide increased traction on the workpiece even with sawdust. Easily cleaned with denatured or rubbing alcohol. No other push block’s grip comes close.
Rip without stopping or burning.
Using two Grr-rippers allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing. The Deflector/Connector connects two Grr-rippers and allows for multiple configurations when used on the table saw, router table, and shaper.
Ultra Comprehensive Systainer Kit
This kit includes two 25th Anniversary GRR-RIPPER AIR models, every GRR-RIPPER accessory, plus two new exclusive accessories—all packaged in a custom Systainer3 Combi M 287.
Two New Exclusive Accessories
Exclusive ReSaw Riser Blocks expand your capability on the table saw, letting you safely handle taller material and achieve resaw-level precision without losing control.
GRR-RIP ReNew restores your GRR-RIPPER's grip in seconds. A quick spray and wipe keeps the Green GRR-RIP material performing like new, year after year.
Support your workpiece and prevent tearout.
The Gravity Heel Kit includes dynamic heels that auto retract mid-board, and drop down to hook the tail end of the workpiece. The specially formulated plastic material allows them to be cut, providing support to prevent tearout at the end of the cut.
Consistently rip as thin as 1/8′′ and up.
The GRR-RIPPER 1/8” Leg accessory attaches to your GRR-RIPPER to cut thin strips safely and repeatably on a table saw. Excellent for edge banding and decorative inlays,The powerful GREEN GRR-RIP controls the workpiece, safely guiding it through the cut.
More control, comfort, and safety.
The Handle Bridge Kit distributes downward pressure evenly. The slotted channels allow you to position the handle for a more comfortable grip. Handle Bridges are equipped with four threaded inserts to attach the Deflector/Connector accessory. The Deflector/Connector protects hands from spinning blades, dust, and debris.
Product details
| Main Specification | |
|---|---|
| Manufacturer | MICROJIG |
| Brand | Microjig |
| Item Package Quantity | 1 |
| Included Components | (1) Microjig Systainer Box (2) NEW GRR-RIPPER AIR (2) 1/8"" Leg Attachment (2) Handle Bridge Kit (2) Deflector/Connector (2) Gravity Heel Kit (2) NEW Riser Block (1) NEW GRR-RIPPER Renew |
| Power Source | Hand-Powered |
| Product Dimensions | 20 x 14 x 12 inches |
| Material | not_applicable |
| Colour | Color Not Applicable |
| Size | One Size Fits all |
| Style | GRR-RIPPER AIR ULTRA ’25 Limited Systainer³ Edition |
| Item Weight | 15.9 pounds |
| Product information | |
| Item model number | GR-2100AIR |
| Technical Details | |
| Part Number | GR-2100AIR |
| Others | |
| Date First Available | 2025 or November 14 |
| Product Type | Table Saw Accessories |