3M Marine Adhesive Sealant 5200FC, Fast Cure, White, 1 oz Tube
5 sold in last 24 hours
- MULTI-SURFACE SEALANT: A permanent solution for bonding marine substrates like wood, fiberglass, and metal
- VERSATILE MARINE APPLICATIONS: Tough yet flexible polyurethane polymer is ideal for deck housings, hull fittings, porthole mounting, fiberglass transoms, and underside molding
- WARD OFF WATER: Resists saltwater and weathering both above and below the water line
- FLEXIBLE BONDS: The flexible elastomeric bond absorbs the stress of vibration, swelling, shrinking, and shock
- FAST CURE: Tack-free in 1-2 hours, fully cures within 48 hours
- For industrial/occupational use only. Not for consumer use
Tags |
Estimated shipping
Select a product to estimate shipping.3M Marine Adhesive Sealant Fast Cure 5200 is a fast-curing version of long-trusted 3M Marine Adhesive Sealant 5200. It is a tough, flexible polyurethane for permanent bonding and sealing, ideal for use on wood, gelcoat, fiberglass, metal and more. It is recommended for interiors, below the waterline and any other places that are shielded from sunlight. Instead of 5-7 days, it typically cures in just 48 hours. Everything else is the same as the industry standard 5200 adhesive sealant that has been used and trusted for more than 50 years by marine professionals in some of the most demanding conditions on earth. It applies right from the container – no mixing is required - and cures to form a firm, flexible, waterproof seal on joints and boat hardware. Far more than a marine caulk, tough, flexible 3M Marine Adhesive Sealant 5200FC dissipates stress caused by vibration and shock and won’t crack under dynamic force. It resists saltwater, wind, weather and temperature extremes for long periods of worry-free enjoyment on the water.
3M Marine Adhesive Sealant 5200 White. The adhesive sealant is extremely strong, retains its strength above or below water line. Stays flexible too - allows for structural movement. Has excellent resistance to weathering and salt water.
Stress caused by shock, vibration, swelling or shrinking is effectively absorbed. Check the bonding and sealing jobs this product can handle for you: fiberglass deck to fiberglass hull, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under mouldings, hull seams above and below water line. Center board trunk joints. Between struts and planking. Stern joints. Deck housing, etc. Easy to apply with manual caulking gun. Remains workable with trowel or spatula up to four hours after application. Won't sag or flow in vertical or horizontal seams.
About 3M Industrial Adhesives and Tapes
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. 3M Industrial Adhesives and Tapes include application-specific products that provide durability, strength, and special characteristics such as temperature resistance and short- and long-term protection. The 3M brand, across thousands of products, represents consistency, superior quality, and value.
Important information
Legal Disclaimer
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.
The Most Important Component of any Marine Adhesive or Sealant: Trust.
Whether you’re boatbuilding, maintaining a fleet or repairing a single watercraft, you expect your adhesive sealants to create watertight seals. But the right ones will do much more. They will resist weathering, shock, vibration, swelling and shrinkage over time. It also means they will earn your trust. 3M designs quick-applying, long-lasting adhesives and sealants for specific conditions – below the waterline, topside and everywhere in between, on virtually any surface you can find on your boat.
The toughest sealants on the sea
Whether you’re bonding trim, toe rails, fittings or fiberglass deck components, or sealing thru-hulls, hatches, hinges, trunk joints or almost anything else on a marine vessel, 3M has an adhesive sealant that’s proven to the task. Our products have set the standard for marine excellence for more than 50 years, and they now include a new generation of advanced polyurethane and silane-modified polymers (SMPs) that further expand their range and effectiveness.
3M Marine Adhesive Sealants are specifically designed for the rigors of the marine environment, bonding or sealing everything from wood, metal and glass to gelcoat and most plastics—including fiber-reinforced plastic (FRP). Boaters have no better friend on the water.
Product details
| Main Specification | |
|---|---|
| Compatible Material | Wood or Fiberglass or Gelcoat |
| Included Components | White or 3M 06535 Marine Adhesive Sealant 5200 Fast Cure - 1 oz. |
| Material | Wood or Polyurethane |
| Manufacturer | 3m |
| Unit Count | 1 Count |
| Item Form | Liquid |
| Specific Uses For Product | fiberglass & Wood Sealant |
| Tensile Strength | 600 psi |
| Brand | 3M |
| UPC | 051135065358 |
| Full Cure Time | 48 Hours |
| Water Resistance Level | Water Resistant |
| Item Package Quantity | 1 |
| Number of Pieces | 1 |
| Colour | White |
| Global Trade Identification Number | 00051135065358 |
| Special Feature | Strong |
| Item Weight | 27.22 G |
| Product information | |
| Volume | 1 Fluid Ounces |
| Technical Details | |
| Material Type | Wood or Polyurethane |
| Part Number | 00051135065358 |
| Model | 5200FC |
| Viscosity Level | Medium to High |
| Item details | |
| Item Type Name | 3M Marine Adhesive Sealant Fast Cure 5200 (06535) – Permanent Bonding and Sealing for Boats and RVs - White – 1 Ounce |
| Others | |
| Product Type | 3M Marine Adhesive Sealant Fast Cure 5200 (06535) – Permanent Bonding and Sealing for Boats and RVs - White – 1 Ounce |
| Other Special Features of the Product | Strong |
| Container Type | Tube |