3-1/4" 240 Grit Silicon carbure TwistFlex Cylinder Hone pour 3"- 3,27" Bores
14 sold in last 24 hours
- Ce qui est inclus: 1 chaque Pro-Graad TwistFlex Taille: 3 1/4" 3.25" (83mm) Diamètre du bore, Longueur de travail de la brosse 3.15", Diamètre du jarret 0.31", Longueur hors tout 13.5". pour UTILISER SUR DIAMETERS BORE 3.00" - 3.27".
- The Pro-Graad TwistFlex 3 1/4 Cylinder Honing & Deburring Tool is manufactured oversized - ORDER BY THE BORE SIZE. Brush will be approximately ten percent oversized, but will easily conform and fit into the bore size diameter due to the flexibility of the honing tool stems.
- Pro-Graad TwistFlex Cylinder Honing & Deburring Tool brushes have round abrasive spheres fastened to ends of flexible stems, which produces pressure and finishing evenly and consistently. for Engine Cylinders, Brake Cylinders, Hydraulics and Valve Guides.
- The Pro-Graad TwistFlex Cylinder Honing & Deburring Tool can be run with hand tools, drill press, or CNC equipment. Apply a lubricant liberally such as a honing tool lubricant, 10-30 weight motor oil, or transmission fluid prior to using honing tool brush. Max RPM is 600, however optimum range is 300 - 500 RPM. Tip: If producing cross-hatching pattern, less is best - maximum of two passes should be done with brush within 20-45 seconds of total run time, averaging between 10-55 strokes.
- The 3.25 inch TwistFlex Cylinder Honing & Deburring Tool is self-centering, self-aligning and will conform to the bore diameter to provide consistent surface finishing, as well as deburring any cross-drilled holes. The brush is self-compensating to produce a consistent finish throughout the life of the tool.
Tags |
Estimated shipping
Select a product to estimate shipping.Pro-Graad TwistFlex Cylinder Honing & Deburring Tools are manufactured oversized - ORDER BY THE HOLE SIZE. The brush will be approximately ten percent oversized, but will easily conform and fit into the bore size diameter due to the flexibility of the tool stems. Surface finishing of the Pro-Graad TwistFlex Cylinder Honing & Deburring Tool allows for a proper ring, seal, and oil control. Pro-Graad TwistFlex Cylinder Honing & Deburring Tools produce a consistent cross-hatching pattern which is ideal to seat piston rings and retain oil for lubrication in combustion chambers. Due to the flexible nature of the Pro-Graad TwistFlex Cylinder Honing & Deburring Tool, it is self-centering, self-aligning, and self-compensating for wear, producing a consistent finish and performance throughout the life of the tool.
Product details
| Main Specification | |
|---|---|
| Matériel compatible | Fer coulé or Acier léger or Acier inoxydable et autres matériaux ferreux plus doux |
| Utilisations recommandées pour le produit | Débourrage or Finition |
| Composantes incluses | 1 chaque Hone de cylindre TwistFlex 3-1/4" or Carbure de silicium or 240 grit or 13,5" Longueur |
| Fabricant | Pro-Graad |
| Numéro d'unité | 1 Compte |
| Type de soie | Globules abrasifs attachés aux tiges flexibles |
| Type de grit | 240 |
| Marque | Pro-Graad |
| Matériel de traitement | Carbure de silicium |
| UPC | 850050327059 |
| Nombre d'articles | 1 |
| Diamètre de l'article | 3,25 pouces |
| Dimensions du produit | 13,5"L x 3,25" W |
| Nombre de pièces | 1 |
| Matériau | Carbure de silicium |
| Product information | |
| Nombre d ' emballages | 1 |
| Technical Details | |
| Numéro de pièce | Carbure de silicium |
| Modèle | TwistFlex Cylinder Hone |
| Type de matériau | Carbure de silicium |
| Numéro du grit | 240 |
| Measurements | |
| Dimensions de l'article | 8 x 2,5 x 2,75 pouces |
| Others | |
| Point en évidence | Hone de cylindre flexible pour l'affinage or le décapage et la finition croisée sur acier or inox or fonte et métaux ferreux |
| Type de produit | Flex Hons |
| Dimensions de l'article L x W | 13,5"L x 3,25" W |
| Type de matériau de traitement | Carbure de silicium |